wip: start exploring some new ideas

init.lua

@@ -21,11 +21,15 @@ Kickstart.nvim is a template for your own configuration.
   And then you can explore or search through `:help lua-guide`
   - https://neovim.io/doc/user/lua-guide.html
 
+Kickstart Installation:
+<TODO Write out the steps here as well?>
 
 Kickstart Guide:
 
 I have left several `:help X` comments throughout the init.lua
 You should run that command and read that help section for more information.
+- TODO: Should write a little bit more about how to use help. And also really push them to be reading the help.
+        Could probably add a few more links now as well. Particularly for lazy.nvim keys, which I didn't do.
 
 In addition, I have some `NOTE:` items throughout the file.
 These are for you, the reader to help understand what is happening. Feel free to delete
@@ -36,6 +40,9 @@ I hope you enjoy your Neovim journey,
 - TJ
 
 P.S. You can delete this when you're done too. It's your config now :)
+
+TODO: Include PDE video link? ;)
+TODO: Include Neovim "Listening To Friendly Manual"? ;)
 --]]
 
 -- Set <space> as the leader key
@@ -60,6 +67,78 @@ if not vim.loop.fs_stat(lazypath) then
 end
 vim.opt.rtp:prepend(lazypath)
 
+-- [[ Setting options ]]
+-- See `:help vim.o`
+-- NOTE: You can change these options as you wish!
+
+-- Set highlight on search
+vim.o.hlsearch = false
+
+-- Make line numbers default
+vim.wo.number = true
+
+-- Enable mouse mode
+vim.o.mouse = 'a'
+
+-- Sync clipboard between OS and Neovim.
+--  Remove this option if you want your OS clipboard to remain independent.
+--  See `:help 'clipboard'`
+vim.o.clipboard = 'unnamedplus'
+
+-- Enable break indent
+vim.o.breakindent = true
+
+-- Save undo history
+vim.o.undofile = true
+
+-- Case-insensitive searching UNLESS \C or capital in search
+vim.o.ignorecase = true
+vim.o.smartcase = true
+
+-- Keep signcolumn on by default
+vim.wo.signcolumn = 'yes'
+
+-- Decrease update time
+vim.o.updatetime = 250
+vim.o.timeoutlen = 300
+
+-- Set completeopt to have a better completion experience
+vim.o.completeopt = 'menuone,noselect'
+
+-- NOTE: You should make sure your terminal supports this
+vim.o.termguicolors = true
+
+-- [[ Basic Keymaps ]]
+
+-- Keymaps for better default experience
+-- See `:help vim.keymap.set()`
+vim.keymap.set({ 'n', 'v' }, '<Space>', '<Nop>', { silent = true })
+
+-- Remap for dealing with word wrap
+vim.keymap.set('n', 'k', "v:count == 0 ? 'gk' : 'k'", { expr = true, silent = true })
+vim.keymap.set('n', 'j', "v:count == 0 ? 'gj' : 'j'", { expr = true, silent = true })
+
+-- Diagnostic keymaps
+vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous diagnostic message' })
+vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next diagnostic message' })
+vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Open floating diagnostic message' })
+vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostics list' })
+
+-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
+-- for people to discover. Otherwise, you normally need to press <c-\><c-n>, which
+-- is not what someone will guess without a bit more experience.
+vim.keymap.set('t', '<esc><esc>', '<c-\\><c-n>', { desc = 'Escape Escape exits terminal mode' })
+
+-- [[ Highlight on yank ]]
+-- See `:help vim.highlight.on_yank()`
+local highlight_group = vim.api.nvim_create_augroup('YankHighlight', { clear = true })
+vim.api.nvim_create_autocmd('TextYankPost', {
+  group = highlight_group,
+  callback = function()
+    vim.highlight.on_yank()
+  end,
+})
+
 -- [[ Configure plugins ]]
 -- NOTE: Here is where you install your plugins.
 --  You can configure plugins using the `config` key.
@@ -78,25 +157,132 @@ require('lazy').setup({
 
   -- NOTE: This is where your plugins related to LSP can be installed.
   --  The configuration is done below. Search for lspconfig to find it below.
-  {
+
-    -- LSP Configuration & Plugins
+  { -- LSP Configuration & Plugins
     'neovim/nvim-lspconfig',
     dependencies = {
       -- Automatically install LSPs to stdpath for neovim
-      { 'williamboman/mason.nvim', config = true },
+      { 'williamboman/mason.nvim', opts = {} },
-      'williamboman/mason-lspconfig.nvim',
+      { 'williamboman/mason-lspconfig.nvim', opts = {} },
+
+      -- Additional lua configuration, makes nvim stuff amazing!
+      { 'folke/neodev.nvim', opts = {} },
 
       -- Useful status updates for LSP
       -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
       { 'j-hui/fidget.nvim', opts = {} },
+    },
+    config = function()
+      -- Enable the following language servers
+      --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
+      --
+      --  Add any additional override configuration in the following tables. They will be passed to
+      --  the `settings` field of the server config. You must look up that documentation yourself.
+      --
+      --  If you want to override the default filetypes that your language server will attach to you can
+      --  define the property 'filetypes' to the map in question.
+      local servers = {
+        -- clangd = {},
+        -- gopls = {},
+        -- pyright = {},
+        -- rust_analyzer = {},
+        -- tsserver = {},
+        -- html = { filetypes = { 'html', 'twig', 'hbs'} },
 
-      -- Additional lua configuration, makes nvim stuff amazing!
+        lua_ls = {
-      'folke/neodev.nvim',
+          Lua = {
+            workspace = { checkThirdParty = false },
+            telemetry = { enable = false },
+            -- NOTE: toggle below to ignore Lua_LS's noisy `missing-fields` warnings
+            -- diagnostics = { disable = { 'missing-fields' } },
+          },
+        },
+      }
+
+      --  This function gets run when an LSP connects to a particular buffer.
+      local on_attach = function(_, bufnr)
+        -- NOTE: Remember that lua is a real programming language, and as such it is possible
+        -- to define small helper and utility functions so you don't have to repeat yourself
+        -- many times.
+        --
+        -- In this case, we create a function that lets us more easily define mappings specific
+        -- for LSP related items. It sets the mode, buffer and description for us each time.
+        local nmap = function(keys, func, desc)
+          if desc then
+            desc = 'LSP: ' .. desc
+          end
+
+          vim.keymap.set('n', keys, func, { buffer = bufnr, desc = desc })
+        end
+
+        -- Important LSP Navigation keybinds
+        nmap('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+        nmap('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+        nmap('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+        nmap('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
+        nmap('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
+        nmap('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
+
+        -- Important LSP Action keybinds
+        nmap('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
+        nmap('<leader>ca', function()
+          vim.lsp.buf.code_action { context = { only = { 'quickfix', 'refactor', 'source' } } }
+        end, '[C]ode [A]ction')
+
+        -- See `:help K` for why this keymap
+        nmap('K', vim.lsp.buf.hover, 'Hover Documentation')
+        nmap('<C-k>', vim.lsp.buf.signature_help, 'Signature Documentation')
+
+        -- Lesser used LSP functionality
+        nmap('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
+
+        -- LSP Workspace Management
+        nmap('<leader>wa', vim.lsp.buf.add_workspace_folder, '[W]orkspace [A]dd Folder')
+        nmap('<leader>wr', vim.lsp.buf.remove_workspace_folder, '[W]orkspace [R]emove Folder')
+        nmap('<leader>wl', function()
+          print(vim.inspect(vim.lsp.buf.list_workspace_folders()))
+        end, '[W]orkspace [L]ist Folders')
+      end
+
+      -- Ensure the servers above are installed
+      local mason_lspconfig = require 'mason-lspconfig'
+      mason_lspconfig.setup {
+        ensure_installed = vim.tbl_keys(servers),
+      }
+
+      -- nvim-cmp supports additional completion capabilities, so broadcast that to servers
+      local capabilities = require('cmp_nvim_lsp').default_capabilities(vim.lsp.protocol.make_client_capabilities())
+      mason_lspconfig.setup_handlers {
+        function(server_name)
+          require('lspconfig')[server_name].setup {
+            capabilities = capabilities,
+            on_attach = on_attach,
+            settings = servers[server_name],
+            filetypes = (servers[server_name] or {}).filetypes,
+          }
+        end,
+      }
+    end,
+  },
+
+  { -- Autoformat
+    'stevearc/conform.nvim',
+    opts = {
+      format_on_save = {
+        timeout_ms = 500,
+        lsp_fallback = true,
+      },
+      formatters_by_ft = {
+        lua = { 'stylua' },
+        -- Conform will run multiple formatters sequentially
+        -- python = { "isort", "black" },
+        -- Use a sub-list to run only the first available formatter
+        -- javascript = { { "prettierd", "prettier" } },
+      },
     },
   },
 
-  {
+  { -- Autocompletion
-    -- Autocompletion
     'hrsh7th/nvim-cmp',
     dependencies = {
       -- Snippet Engine & its associated nvim-cmp source
@@ -121,12 +307,87 @@ require('lazy').setup({
       -- Adds a number of user-friendly snippets
       'rafamadriz/friendly-snippets',
     },
+    config = function()
+      -- See `:help cmp`
+      local cmp = require 'cmp'
+      local luasnip = require 'luasnip'
+      require('luasnip.loaders.from_vscode').lazy_load()
+      luasnip.config.setup {}
+
+      cmp.setup {
+        snippet = {
+          expand = function(args)
+            luasnip.lsp_expand(args.body)
+          end,
+        },
+        completion = {
+          completeopt = 'menu,menuone,noinsert',
+        },
+        mapping = cmp.mapping.preset.insert {
+          ['<C-n>'] = cmp.mapping.select_next_item(),
+          ['<C-p>'] = cmp.mapping.select_prev_item(),
+          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
+          ['<C-f>'] = cmp.mapping.scroll_docs(4),
+          ['<C-Space>'] = cmp.mapping.complete {},
+          ['<CR>'] = cmp.mapping.confirm {
+            behavior = cmp.ConfirmBehavior.Replace,
+            select = true,
+          },
+          ['<Tab>'] = cmp.mapping(function(fallback)
+            if cmp.visible() then
+              cmp.select_next_item()
+            elseif luasnip.expand_or_locally_jumpable() then
+              luasnip.expand_or_jump()
+            else
+              fallback()
+            end
+          end, { 'i', 's' }),
+          ['<S-Tab>'] = cmp.mapping(function(fallback)
+            if cmp.visible() then
+              cmp.select_prev_item()
+            elseif luasnip.locally_jumpable(-1) then
+              luasnip.jump(-1)
+            else
+              fallback()
+            end
+          end, { 'i', 's' }),
+        },
+        sources = {
+          { name = 'nvim_lsp' },
+          { name = 'luasnip' },
+          { name = 'path' },
+        },
+      }
+    end,
   },
 
-  -- Useful plugin to show you pending keybinds.
+  { -- Useful plugin to show you pending keybinds.
-  { 'folke/which-key.nvim', opts = {} },
+    'folke/which-key.nvim',
-  {
+    event = 'VeryLazy',
-    -- Adds git related signs to the gutter, as well as utilities for managing changes
+    config = function()
+      require('which-key').setup()
+
+      -- document existing key chains
+      require('which-key').register {
+        ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
+        ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
+        ['<leader>g'] = { name = '[G]it', _ = 'which_key_ignore' },
+        ['<leader>h'] = { name = 'Git [H]unk', _ = 'which_key_ignore' },
+        ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
+        ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
+        ['<leader>t'] = { name = '[T]oggle', _ = 'which_key_ignore' },
+        ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
+      }
+      -- register which-key VISUAL mode
+      -- required for visual <leader>hs (hunk stage) to work
+      require('which-key').register({
+        ['<leader>'] = { name = 'VISUAL <leader>' },
+        ['<leader>h'] = { 'Git [H]unk' },
+      }, { mode = 'v' })
+    end,
+  },
+
+  { -- Adds git related signs to the gutter, as well as utilities for managing changes
     'lewis6991/gitsigns.nvim',
     opts = {
       -- See `:help gitsigns.txt`
@@ -201,19 +462,29 @@ require('lazy').setup({
   },
 
   {
-    -- Theme inspired by Atom
+    'folke/tokyonight.nvim',
-    'navarasu/onedark.nvim',
+    lazy = false, -- make sure we load this during startup if it is your main colorscheme
-    priority = 1000,
+    priority = 1000, -- make sure to load this before all the other start plugins
-    lazy = false,
     config = function()
-      require('onedark').setup {
+      -- load the colorscheme here
-        -- Set a style preset. 'dark' is default.
+      vim.cmd.colorscheme 'tokyonight'
-        style = 'dark', -- dark, darker, cool, deep, warm, warmer, light
-      }
-      require('onedark').load()
     end,
   },
 
+  -- {
+  --   -- Theme inspired by Atom
+  --   'navarasu/onedark.nvim',
+  --   priority = 1000,
+  --   lazy = false,
+  --   config = function()
+  --     require('onedark').setup {
+  --       -- Set a style preset. 'dark' is default.
+  --       style = 'dark', -- dark, darker, cool, deep, warm, warmer, light
+  --     }
+  --     require('onedark').load()
+  --   end,
+  -- },
+
   {
     -- Set lualine as statusline
     'nvim-lualine/lualine.nvim',
@@ -228,8 +499,7 @@ require('lazy').setup({
     },
   },
 
-  {
+  { -- Add indentation guides even on blank lines
-    -- Add indentation guides even on blank lines
     'lukas-reineke/indent-blankline.nvim',
     -- Enable `lukas-reineke/indent-blankline.nvim`
     -- See `:help ibl`
@@ -240,8 +510,7 @@ require('lazy').setup({
   -- "gc" to comment visual regions/lines
   { 'numToStr/Comment.nvim', opts = {} },
 
-  -- Fuzzy Finder (files, lsp, etc)
+  { -- Fuzzy Finder (files, lsp, etc)
-  {
     'nvim-telescope/telescope.nvim',
     branch = '0.1.x',
     dependencies = {
@@ -259,21 +528,139 @@ require('lazy').setup({
         end,
       },
     },
+    config = function()
+      -- [[ Configure Telescope ]]
+      -- See `:help telescope` and `:help telescope.setup()`
+      require('telescope').setup {
+        defaults = {
+          mappings = {
+            i = {
+              ['<C-u>'] = false,
+              ['<C-d>'] = false,
+            },
+          },
+        },
+      }
+
+      -- Enable telescope fzf native, if installed
+      pcall(require('telescope').load_extension, 'fzf')
+
+      -- See `:help telescope.builtin`
+      vim.keymap.set('n', '<leader>?', require('telescope.builtin').oldfiles, { desc = '[?] Find recently opened files' })
+      vim.keymap.set('n', '<leader><space>', require('telescope.builtin').buffers, { desc = '[ ] Find existing buffers' })
+      vim.keymap.set('n', '<leader>ss', require('telescope.builtin').builtin, { desc = '[S]earch [S]elect Telescope' })
+      vim.keymap.set('n', '<leader>gf', require('telescope.builtin').git_files, { desc = 'Search [G]it [F]iles' })
+      vim.keymap.set('n', '<leader>sf', require('telescope.builtin').find_files, { desc = '[S]earch [F]iles' })
+      vim.keymap.set('n', '<leader>sh', require('telescope.builtin').help_tags, { desc = '[S]earch [H]elp' })
+      vim.keymap.set('n', '<leader>sw', require('telescope.builtin').grep_string, { desc = '[S]earch current [W]ord' })
+      vim.keymap.set('n', '<leader>sg', require('telescope.builtin').live_grep, { desc = '[S]earch by [G]rep' })
+      vim.keymap.set('n', '<leader>sd', require('telescope.builtin').diagnostics, { desc = '[S]earch [D]iagnostics' })
+      vim.keymap.set('n', '<leader>sr', require('telescope.builtin').resume, { desc = '[S]earch [R]esume' })
+
+      -- Slightly advanced example of overriding default behavior and theme
+      vim.keymap.set('n', '<leader>/', function()
+        -- You can pass additional configuration to telescope to change theme, layout, etc.
+        require('telescope.builtin').current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
+          winblend = 10,
+          previewer = false,
+        })
+      end, { desc = '[/] Fuzzily search in current buffer' })
+
+      -- Also possible to pass additional configuration options.
+      --  See `:help telescope.builtin.live_grep()` for information about particular pickers
+      vim.keymap.set('n', '<leader>s/', function()
+        require('telescope.builtin').live_grep {
+          grep_open_files = true,
+          prompt_title = 'Live Grep in Open Files',
+        }
+      end, { desc = '[S]earch [/] in Open Files' })
+    end,
   },
 
-  {
+  { -- Highlight, edit, and navigate code
-    -- Highlight, edit, and navigate code
     'nvim-treesitter/nvim-treesitter',
     dependencies = {
       'nvim-treesitter/nvim-treesitter-textobjects',
     },
     build = ':TSUpdate',
+    config = function()
+      -- [[ Configure Treesitter ]]
+      -- See `:help nvim-treesitter`
+      -- Defer Treesitter setup after first render to improve startup time of 'nvim {filename}'
+      ---@diagnostic disable-next-line: missing-fields
+      require('nvim-treesitter.configs').setup {
+        -- Add languages to be installed here that you want installed for treesitter
+        ensure_installed = { 'c', 'cpp', 'go', 'lua', 'python', 'rust', 'tsx', 'javascript', 'typescript', 'vimdoc', 'vim', 'bash' },
+
+        -- Autoinstall languages that are not installed. Defaults to false (but you can change for yourself!)
+        auto_install = false,
+        -- Install languages synchronously (only applied to `ensure_installed`)
+        sync_install = false,
+        -- List of parsers to ignore installing
+        ignore_install = {},
+        -- You can specify additional Treesitter modules here: -- For example: -- playground = {--enable = true,-- },
+        highlight = { enable = true },
+        indent = { enable = true },
+        incremental_selection = {
+          enable = true,
+          keymaps = {
+            init_selection = '<c-space>',
+            node_incremental = '<c-space>',
+            scope_incremental = '<c-s>',
+            node_decremental = '<M-space>',
+          },
+        },
+        textobjects = {
+          select = {
+            enable = true,
+            lookahead = true, -- Automatically jump forward to textobj, similar to targets.vim
+            keymaps = {
+              -- You can use the capture groups defined in textobjects.scm
+              ['aa'] = '@parameter.outer',
+              ['ia'] = '@parameter.inner',
+              ['af'] = '@function.outer',
+              ['if'] = '@function.inner',
+              ['ac'] = '@class.outer',
+              ['ic'] = '@class.inner',
+            },
+          },
+          move = {
+            enable = true,
+            set_jumps = true, -- whether to set jumps in the jumplist
+            goto_next_start = {
+              [']m'] = '@function.outer',
+              [']]'] = '@class.outer',
+            },
+            goto_next_end = {
+              [']M'] = '@function.outer',
+              [']['] = '@class.outer',
+            },
+            goto_previous_start = {
+              ['[m'] = '@function.outer',
+              ['[['] = '@class.outer',
+            },
+            goto_previous_end = {
+              ['[M'] = '@function.outer',
+              ['[]'] = '@class.outer',
+            },
+          },
+          swap = {
+            enable = true,
+            swap_next = {
+              ['<leader>a'] = '@parameter.inner',
+            },
+            swap_previous = {
+              ['<leader>A'] = '@parameter.inner',
+            },
+          },
+        },
+      }
+    end,
   },
 
   -- NOTE: Next Step on Your Neovim Journey: Add/Configure additional "plugins" for kickstart
   --       These are some example plugins that I've included in the kickstart repository.
   --       Uncomment any of the lines below to enable them.
-  -- require 'kickstart.plugins.autoformat',
   -- require 'kickstart.plugins.debug',
 
   -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
@@ -285,400 +672,5 @@ require('lazy').setup({
   -- { import = 'custom.plugins' },
 }, {})
 
--- [[ Setting options ]]
--- See `:help vim.o`
--- NOTE: You can change these options as you wish!
-
--- Set highlight on search
-vim.o.hlsearch = false
-
--- Make line numbers default
-vim.wo.number = true
-
--- Enable mouse mode
-vim.o.mouse = 'a'
-
--- Sync clipboard between OS and Neovim.
---  Remove this option if you want your OS clipboard to remain independent.
---  See `:help 'clipboard'`
-vim.o.clipboard = 'unnamedplus'
-
--- Enable break indent
-vim.o.breakindent = true
-
--- Save undo history
-vim.o.undofile = true
-
--- Case-insensitive searching UNLESS \C or capital in search
-vim.o.ignorecase = true
-vim.o.smartcase = true
-
--- Keep signcolumn on by default
-vim.wo.signcolumn = 'yes'
-
--- Decrease update time
-vim.o.updatetime = 250
-vim.o.timeoutlen = 300
-
--- Set completeopt to have a better completion experience
-vim.o.completeopt = 'menuone,noselect'
-
--- NOTE: You should make sure your terminal supports this
-vim.o.termguicolors = true
-
--- [[ Basic Keymaps ]]
-
--- Keymaps for better default experience
--- See `:help vim.keymap.set()`
-vim.keymap.set({ 'n', 'v' }, '<Space>', '<Nop>', { silent = true })
-
--- Remap for dealing with word wrap
-vim.keymap.set('n', 'k', "v:count == 0 ? 'gk' : 'k'", { expr = true, silent = true })
-vim.keymap.set('n', 'j', "v:count == 0 ? 'gj' : 'j'", { expr = true, silent = true })
-
--- Diagnostic keymaps
-vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous diagnostic message' })
-vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next diagnostic message' })
-vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Open floating diagnostic message' })
-vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostics list' })
-
--- [[ Highlight on yank ]]
--- See `:help vim.highlight.on_yank()`
-local highlight_group = vim.api.nvim_create_augroup('YankHighlight', { clear = true })
-vim.api.nvim_create_autocmd('TextYankPost', {
-  callback = function()
-    vim.highlight.on_yank()
-  end,
-  group = highlight_group,
-  pattern = '*',
-})
-
--- [[ Configure Telescope ]]
--- See `:help telescope` and `:help telescope.setup()`
-require('telescope').setup {
-  defaults = {
-    mappings = {
-      i = {
-        ['<C-u>'] = false,
-        ['<C-d>'] = false,
-      },
-    },
-  },
-}
-
--- Enable telescope fzf native, if installed
-pcall(require('telescope').load_extension, 'fzf')
-
--- Telescope live_grep in git root
--- Function to find the git root directory based on the current buffer's path
-local function find_git_root()
-  -- Use the current buffer's path as the starting point for the git search
-  local current_file = vim.api.nvim_buf_get_name(0)
-  local current_dir
-  local cwd = vim.fn.getcwd()
-  -- If the buffer is not associated with a file, return nil
-  if current_file == '' then
-    current_dir = cwd
-  else
-    -- Extract the directory from the current file's path
-    current_dir = vim.fn.fnamemodify(current_file, ':h')
-  end
-
-  -- Find the Git root directory from the current file's path
-  local git_root = vim.fn.systemlist('git -C ' .. vim.fn.escape(current_dir, ' ') .. ' rev-parse --show-toplevel')[1]
-  if vim.v.shell_error ~= 0 then
-    print 'Not a git repository. Searching on current working directory'
-    return cwd
-  end
-  return git_root
-end
-
--- Custom live_grep function to search in git root
-local function live_grep_git_root()
-  local git_root = find_git_root()
-  if git_root then
-    require('telescope.builtin').live_grep {
-      search_dirs = { git_root },
-    }
-  end
-end
-
-vim.api.nvim_create_user_command('LiveGrepGitRoot', live_grep_git_root, {})
-
--- See `:help telescope.builtin`
-vim.keymap.set('n', '<leader>?', require('telescope.builtin').oldfiles, { desc = '[?] Find recently opened files' })
-vim.keymap.set('n', '<leader><space>', require('telescope.builtin').buffers, { desc = '[ ] Find existing buffers' })
-vim.keymap.set('n', '<leader>/', function()
-  -- You can pass additional configuration to telescope to change theme, layout, etc.
-  require('telescope.builtin').current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
-    winblend = 10,
-    previewer = false,
-  })
-end, { desc = '[/] Fuzzily search in current buffer' })
-
-local function telescope_live_grep_open_files()
-  require('telescope.builtin').live_grep {
-    grep_open_files = true,
-    prompt_title = 'Live Grep in Open Files',
-  }
-end
-vim.keymap.set('n', '<leader>s/', telescope_live_grep_open_files, { desc = '[S]earch [/] in Open Files' })
-vim.keymap.set('n', '<leader>ss', require('telescope.builtin').builtin, { desc = '[S]earch [S]elect Telescope' })
-vim.keymap.set('n', '<leader>gf', require('telescope.builtin').git_files, { desc = 'Search [G]it [F]iles' })
-vim.keymap.set('n', '<leader>sf', require('telescope.builtin').find_files, { desc = '[S]earch [F]iles' })
-vim.keymap.set('n', '<leader>sh', require('telescope.builtin').help_tags, { desc = '[S]earch [H]elp' })
-vim.keymap.set('n', '<leader>sw', require('telescope.builtin').grep_string, { desc = '[S]earch current [W]ord' })
-vim.keymap.set('n', '<leader>sg', require('telescope.builtin').live_grep, { desc = '[S]earch by [G]rep' })
-vim.keymap.set('n', '<leader>sG', ':LiveGrepGitRoot<cr>', { desc = '[S]earch by [G]rep on Git Root' })
-vim.keymap.set('n', '<leader>sd', require('telescope.builtin').diagnostics, { desc = '[S]earch [D]iagnostics' })
-vim.keymap.set('n', '<leader>sr', require('telescope.builtin').resume, { desc = '[S]earch [R]esume' })
-
--- [[ Configure Treesitter ]]
--- See `:help nvim-treesitter`
--- Defer Treesitter setup after first render to improve startup time of 'nvim {filename}'
-vim.defer_fn(function()
-  require('nvim-treesitter.configs').setup {
-    -- Add languages to be installed here that you want installed for treesitter
-    ensure_installed = { 'c', 'cpp', 'go', 'lua', 'python', 'rust', 'tsx', 'javascript', 'typescript', 'vimdoc', 'vim', 'bash' },
-
-    -- Autoinstall languages that are not installed. Defaults to false (but you can change for yourself!)
-    auto_install = false,
-    -- Install languages synchronously (only applied to `ensure_installed`)
-    sync_install = false,
-    -- List of parsers to ignore installing
-    ignore_install = {},
-    -- You can specify additional Treesitter modules here: -- For example: -- playground = {--enable = true,-- },
-    modules = {},
-    highlight = { enable = true },
-    indent = { enable = true },
-    incremental_selection = {
-      enable = true,
-      keymaps = {
-        init_selection = '<c-space>',
-        node_incremental = '<c-space>',
-        scope_incremental = '<c-s>',
-        node_decremental = '<M-space>',
-      },
-    },
-    textobjects = {
-      select = {
-        enable = true,
-        lookahead = true, -- Automatically jump forward to textobj, similar to targets.vim
-        keymaps = {
-          -- You can use the capture groups defined in textobjects.scm
-          ['aa'] = '@parameter.outer',
-          ['ia'] = '@parameter.inner',
-          ['af'] = '@function.outer',
-          ['if'] = '@function.inner',
-          ['ac'] = '@class.outer',
-          ['ic'] = '@class.inner',
-        },
-      },
-      move = {
-        enable = true,
-        set_jumps = true, -- whether to set jumps in the jumplist
-        goto_next_start = {
-          [']m'] = '@function.outer',
-          [']]'] = '@class.outer',
-        },
-        goto_next_end = {
-          [']M'] = '@function.outer',
-          [']['] = '@class.outer',
-        },
-        goto_previous_start = {
-          ['[m'] = '@function.outer',
-          ['[['] = '@class.outer',
-        },
-        goto_previous_end = {
-          ['[M'] = '@function.outer',
-          ['[]'] = '@class.outer',
-        },
-      },
-      swap = {
-        enable = true,
-        swap_next = {
-          ['<leader>a'] = '@parameter.inner',
-        },
-        swap_previous = {
-          ['<leader>A'] = '@parameter.inner',
-        },
-      },
-    },
-  }
-end, 0)
-
--- [[ Configure LSP ]]
---  This function gets run when an LSP connects to a particular buffer.
-local on_attach = function(_, bufnr)
-  -- NOTE: Remember that lua is a real programming language, and as such it is possible
-  -- to define small helper and utility functions so you don't have to repeat yourself
-  -- many times.
-  --
-  -- In this case, we create a function that lets us more easily define mappings specific
-  -- for LSP related items. It sets the mode, buffer and description for us each time.
-  local nmap = function(keys, func, desc)
-    if desc then
-      desc = 'LSP: ' .. desc
-    end
-
-    vim.keymap.set('n', keys, func, { buffer = bufnr, desc = desc })
-  end
-
-  nmap('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
-  nmap('<leader>ca', function()
-    vim.lsp.buf.code_action { context = { only = { 'quickfix', 'refactor', 'source' } } }
-  end, '[C]ode [A]ction')
-
-  nmap('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
-  nmap('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
-  nmap('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
-  nmap('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
-  nmap('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
-  nmap('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
-
-  -- See `:help K` for why this keymap
-  nmap('K', vim.lsp.buf.hover, 'Hover Documentation')
-  nmap('<C-k>', vim.lsp.buf.signature_help, 'Signature Documentation')
-
-  -- Lesser used LSP functionality
-  nmap('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
-  nmap('<leader>wa', vim.lsp.buf.add_workspace_folder, '[W]orkspace [A]dd Folder')
-  nmap('<leader>wr', vim.lsp.buf.remove_workspace_folder, '[W]orkspace [R]emove Folder')
-  nmap('<leader>wl', function()
-    print(vim.inspect(vim.lsp.buf.list_workspace_folders()))
-  end, '[W]orkspace [L]ist Folders')
-
-  -- Create a command `:Format` local to the LSP buffer
-  vim.api.nvim_buf_create_user_command(bufnr, 'Format', function(_)
-    vim.lsp.buf.format()
-  end, { desc = 'Format current buffer with LSP' })
-end
-
--- document existing key chains
-require('which-key').register {
-  ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
-  ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
-  ['<leader>g'] = { name = '[G]it', _ = 'which_key_ignore' },
-  ['<leader>h'] = { name = 'Git [H]unk', _ = 'which_key_ignore' },
-  ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
-  ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
-  ['<leader>t'] = { name = '[T]oggle', _ = 'which_key_ignore' },
-  ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
-}
--- register which-key VISUAL mode
--- required for visual <leader>hs (hunk stage) to work
-require('which-key').register({
-  ['<leader>'] = { name = 'VISUAL <leader>' },
-  ['<leader>h'] = { 'Git [H]unk' },
-}, { mode = 'v' })
-
--- mason-lspconfig requires that these setup functions are called in this order
--- before setting up the servers.
-require('mason').setup()
-require('mason-lspconfig').setup()
-
--- Enable the following language servers
---  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
---
---  Add any additional override configuration in the following tables. They will be passed to
---  the `settings` field of the server config. You must look up that documentation yourself.
---
---  If you want to override the default filetypes that your language server will attach to you can
---  define the property 'filetypes' to the map in question.
-local servers = {
-  -- clangd = {},
-  -- gopls = {},
-  -- pyright = {},
-  -- rust_analyzer = {},
-  -- tsserver = {},
-  -- html = { filetypes = { 'html', 'twig', 'hbs'} },
-
-  lua_ls = {
-    Lua = {
-      workspace = { checkThirdParty = false },
-      telemetry = { enable = false },
-      -- NOTE: toggle below to ignore Lua_LS's noisy `missing-fields` warnings
-      -- diagnostics = { disable = { 'missing-fields' } },
-    },
-  },
-}
-
--- Setup neovim lua configuration
-require('neodev').setup()
-
--- nvim-cmp supports additional completion capabilities, so broadcast that to servers
-local capabilities = vim.lsp.protocol.make_client_capabilities()
-capabilities = require('cmp_nvim_lsp').default_capabilities(capabilities)
-
--- Ensure the servers above are installed
-local mason_lspconfig = require 'mason-lspconfig'
-
-mason_lspconfig.setup {
-  ensure_installed = vim.tbl_keys(servers),
-}
-
-mason_lspconfig.setup_handlers {
-  function(server_name)
-    require('lspconfig')[server_name].setup {
-      capabilities = capabilities,
-      on_attach = on_attach,
-      settings = servers[server_name],
-      filetypes = (servers[server_name] or {}).filetypes,
-    }
-  end,
-}
-
--- [[ Configure nvim-cmp ]]
--- See `:help cmp`
-local cmp = require 'cmp'
-local luasnip = require 'luasnip'
-require('luasnip.loaders.from_vscode').lazy_load()
-luasnip.config.setup {}
-
-cmp.setup {
-  snippet = {
-    expand = function(args)
-      luasnip.lsp_expand(args.body)
-    end,
-  },
-  completion = {
-    completeopt = 'menu,menuone,noinsert',
-  },
-  mapping = cmp.mapping.preset.insert {
-    ['<C-n>'] = cmp.mapping.select_next_item(),
-    ['<C-p>'] = cmp.mapping.select_prev_item(),
-    ['<C-b>'] = cmp.mapping.scroll_docs(-4),
-    ['<C-f>'] = cmp.mapping.scroll_docs(4),
-    ['<C-Space>'] = cmp.mapping.complete {},
-    ['<CR>'] = cmp.mapping.confirm {
-      behavior = cmp.ConfirmBehavior.Replace,
-      select = true,
-    },
-    ['<Tab>'] = cmp.mapping(function(fallback)
-      if cmp.visible() then
-        cmp.select_next_item()
-      elseif luasnip.expand_or_locally_jumpable() then
-        luasnip.expand_or_jump()
-      else
-        fallback()
-      end
-    end, { 'i', 's' }),
-    ['<S-Tab>'] = cmp.mapping(function(fallback)
-      if cmp.visible() then
-        cmp.select_prev_item()
-      elseif luasnip.locally_jumpable(-1) then
-        luasnip.jump(-1)
-      else
-        fallback()
-      end
-    end, { 'i', 's' }),
-  },
-  sources = {
-    { name = 'nvim_lsp' },
-    { name = 'luasnip' },
-    { name = 'path' },
-  },
-}
-
 -- The line beneath this is called `modeline`. See `:help modeline`
 -- vim: ts=2 sts=2 sw=2 et

lazy-lock.json

@@ -0,0 +1,29 @@
+{
+  "Comment.nvim": { "branch": "master", "commit": "0236521ea582747b58869cb72f70ccfa967d2e89" },
+  "LuaSnip": { "branch": "master", "commit": "f3b3d3446bcbfa62d638b1903ff00a78b2b730a1" },
+  "cmp-nvim-lsp": { "branch": "main", "commit": "5af77f54de1b16c34b23cba810150689a3a90312" },
+  "cmp-path": { "branch": "main", "commit": "91ff86cd9c29299a64f968ebb45846c485725f23" },
+  "cmp_luasnip": { "branch": "master", "commit": "05a9ab28b53f71d1aece421ef32fee2cb857a843" },
+  "conform.nvim": { "branch": "master", "commit": "4c01323a67f1636d73803aad4e8e735bad7a9561" },
+  "fidget.nvim": { "branch": "main", "commit": "60404ba67044c6ab01894dd5bf77bd64ea5e09aa" },
+  "friendly-snippets": { "branch": "main", "commit": "dbd45e9ba76d535e4cba88afa1b7aa43bb765336" },
+  "gitsigns.nvim": { "branch": "main", "commit": "2c2463dbd82eddd7dbab881c3a62cfbfbe3c67ae" },
+  "indent-blankline.nvim": { "branch": "master", "commit": "821a7acd88587d966f7e464b0b3031dfe7f5680c" },
+  "lazy.nvim": { "branch": "main", "commit": "aedcd79811d491b60d0a6577a9c1701063c2a609" },
+  "lualine.nvim": { "branch": "master", "commit": "7d131a8d3ba5016229e8a1d08bf8782acea98852" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "60f6805b12a12e8a912aeb2f975dec1794a8994e" },
+  "mason.nvim": { "branch": "main", "commit": "c43eeb5614a09dc17c03a7fb49de2e05de203924" },
+  "neodev.nvim": { "branch": "main", "commit": "bbe17de89345ce40725e721d347c596dc4a02b32" },
+  "nvim-cmp": { "branch": "main", "commit": "04e0ca376d6abdbfc8b52180f8ea236cbfddf782" },
+  "nvim-lspconfig": { "branch": "master", "commit": "1699ce10c3aaf861cfa0c1303fcd19d2ed93e7ad" },
+  "nvim-treesitter": { "branch": "master", "commit": "6bd108a6f10aa01b854c3c673b6d9d61662a8c93" },
+  "nvim-treesitter-textobjects": { "branch": "master", "commit": "7f00d94543f1fd37cab2afa2e9a6cd54e1c6b9ef" },
+  "plenary.nvim": { "branch": "master", "commit": "4f71c0c4a196ceb656c824a70792f3df3ce6bb6d" },
+  "telescope-fzf-native.nvim": { "branch": "main", "commit": "6c921ca12321edaa773e324ef64ea301a1d0da62" },
+  "telescope.nvim": { "branch": "0.1.x", "commit": "d90956833d7c27e73c621a61f20b29fdb7122709" },
+  "tokyonight.nvim": { "branch": "main", "commit": "610179f7f12db3d08540b6cc61434db2eaecbcff" },
+  "vim-fugitive": { "branch": "master", "commit": "011cf4fcb93a9649ffc6dcdff56ef948f5d0f7cc" },
+  "vim-rhubarb": { "branch": "master", "commit": "ee69335de176d9325267b0fd2597a22901d927b1" },
+  "vim-sleuth": { "branch": "master", "commit": "1cc4557420f215d02c4d2645a748a816c220e99b" },
+  "which-key.nvim": { "branch": "main", "commit": "4433e5ec9a507e5097571ed55c02ea9658fb268a" }
+}

lua/kickstart/plugins/autoformat.lua

@@ -1,74 +0,0 @@
--- autoformat.lua
---
--- Use your language server to automatically format your code on save.
--- Adds additional commands as well to manage the behavior
-
-return {
-  'neovim/nvim-lspconfig',
-  config = function()
-    -- Switch for controlling whether you want autoformatting.
-    --  Use :KickstartFormatToggle to toggle autoformatting on or off
-    local format_is_enabled = true
-    vim.api.nvim_create_user_command('KickstartFormatToggle', function()
-      format_is_enabled = not format_is_enabled
-      print('Setting autoformatting to: ' .. tostring(format_is_enabled))
-    end, {})
-
-    -- Create an augroup that is used for managing our formatting autocmds.
-    --      We need one augroup per client to make sure that multiple clients
-    --      can attach to the same buffer without interfering with each other.
-    local _augroups = {}
-    local get_augroup = function(client)
-      if not _augroups[client.id] then
-        local group_name = 'kickstart-lsp-format-' .. client.name
-        local id = vim.api.nvim_create_augroup(group_name, { clear = true })
-        _augroups[client.id] = id
-      end
-
-      return _augroups[client.id]
-    end
-
-    -- Whenever an LSP attaches to a buffer, we will run this function.
-    --
-    -- See `:help LspAttach` for more information about this autocmd event.
-    vim.api.nvim_create_autocmd('LspAttach', {
-      group = vim.api.nvim_create_augroup('kickstart-lsp-attach-format', { clear = true }),
-      -- This is where we attach the autoformatting for reasonable clients
-      callback = function(args)
-        local client_id = args.data.client_id
-        local client = vim.lsp.get_client_by_id(client_id)
-        local bufnr = args.buf
-
-        -- Only attach to clients that support document formatting
-        if not client.server_capabilities.documentFormattingProvider then
-          return
-        end
-
-        -- Tsserver usually works poorly. Sorry you work with bad languages
-        -- You can remove this line if you know what you're doing :)
-        if client.name == 'tsserver' then
-          return
-        end
-
-        -- Create an autocmd that will run *before* we save the buffer.
-        --  Run the formatting command for the LSP that has just attached.
-        vim.api.nvim_create_autocmd('BufWritePre', {
-          group = get_augroup(client),
-          buffer = bufnr,
-          callback = function()
-            if not format_is_enabled then
-              return
-            end
-
-            vim.lsp.buf.format {
-              async = false,
-              filter = function(c)
-                return c.id == client.id
-              end,
-            }
-          end,
-        })
-      end,
-    })
-  end,
-}